Ultra-Low Pressure Fine Fog Nozzles/ Flat Spray BAVV series nozzles

Marka: IKEUCHI

Thread standard	-	Pipe conn. size	Liquid inlet: Rc1/4, Air inlet: Rc3/8	Standard pressure	-
Spray angle	60° (*1)	Spray capacity	9.0–123 ℓ/hr	Supply air type	Blower air
Liquid feeding system	Liquid pressure	Mean droplet diameter	40–100 μm (*3)	Air consumption	76–254 ℓ/min, Normal
Air pressure	0.02 MPa	Free passage diameter	2.5–4.7 mm (*2)

Features

• Flat spray pneumatic nozzle producing fine atomization with a mean droplet diameter of 40 μm or more (*3).
• Energy-saving for blower-use. Low running cost.
• Clog-resistant design due to large free passage diameter.

*1) Spray angle measured at both air and liquid pressure of 0.02 MPa.
*2) Free passage diameter of nozzle orifice.
*3) Measured by Laser Doppler Method.

Applications

• Cleaning: Liquid crystal, glass substrate, printed circuit boards
• Cooling: Steel plates
• Dust suppression: Raw material conveyor line
• Moisture control: Paper making

Industries in which this nozzle is used

• Steelmaking
• Electronics
• Paper & Pulp
• Printing
• Food

Product specifications

Structure

• Comprising four parts: Nozzle, mixing adaptor, air socket, and liquid socket.
• Internal mixing type designed to mix compressed air and liquid inside the nozzle (Inner air type: compressed air flows in the center of the nozzle, while liquid flows along its circumference).
• Liquid pressure type.

Material

Stainless steel 303 & 304 (See the component list below the drawing)

Mass